Hoover Washing Machine Error Codes
Hoover washing machines show E-codes such as E02 and E03 (sometimes written E2 and E3). Hoover’s advice applies to the model codes it lists, so check yours.
Codes can vary by model
Check the model number on your washing machine’s rating label and your manual. We only list codes we’ve checked against Hoover guidance. For anything else, use Hoover UK support.
| Code | What it means | Severity |
|---|---|---|
| E02 also E2 | The machine hasn’t filled with water within about 6 minutes. | Usually simple |
| E03 also E3 | The machine hasn’t been able to drain the water away quickly enough. | Check carefully |
Code not listed? Try the fault finder or start from the symptom below. More about Hoover codes and support.
Common washing machine problems
- Washing machine not drainingA washing machine that won’t drain is usually caused by a blocked pump filter, a kinked…
- Washing machine not spinningIf your washing machine won’t spin, the load is often unbalanced or too big, or the…
- Washing machine door won’t openA washing machine door that won’t open is usually locked for a reason: there’s still…
- Washing machine leakingWhere the water comes from tells you most. Leaks at the front usually come from the…
- Washing machine not filling with waterIf no water goes into your washing machine, or it fills very slowly, the tap may not be…
- Washing machine shaking or movingA washing machine that shakes, bangs or walks across the floor on spin is usually not…